In Our Customers Own Words ...

From Dana R. Osburn, Queens Cove Yacht Club, Georgian Bay, Ontario, Canada...
I used your Boat Brite Clear Bottom Coating this year for the first time on the unpainted hull of my 9 year old Four Winns Vista cruiser.  I was able to easily apply it myself with a low knap roller and I have been quite pleased with the outcome. Most importantly the boat looks great, and I have noticed a marked increase in performance.   I'm realizing an almost 10% increase in cruising speed with the engine at the same rpm as it was before applying the bottom coating.  Keep up the good work!

From Brian McCarty, Adirondack Detailing, 1000 Islands, NY...
Your products work very well on my new Sea Ray. I was first introduced to your Boat Brite Polish and now have added your Ultimate Cleaners to my dock box. I am very impressed that such a powerful cleaner doesn't harm the environment. I have and will continue to tell my boating friends to try your products. Thanks for making my boat cleaning a little more enjoyable.

From Dan Groth...
John, that soy strip is some great stuff!! I used it to strip away varnish and stain on my boat last spring and it worked better than anything I've ever trie. I just bought more to work on some indoor projects this winter.I also used it to strip away paint on an old farm tractor. I call it the "Lazy mans way to strip" No harmful fumes, and I don't worry about getting it on my hands. I start with a scraper after it bubbles up, then use one of those scrubby pads with water to finish...great product!

From Bob on the Chesapeake...
John, thought that I would report on the success of your products. First the fuel and stain remover worked great, just spray on and rinse off. The stain remover for the Chesapeake Bay on the water line worked just as well. I used it compared to Y-10, another product, and found that both removed about the same, but yours was easier to handle, just spray and rinse off. The varnish remover worked very well, and the directions are right on. Must leave it stay on for 4-5 hours, with some saran wrap to cover it. The one thing that I found helpful, especially on the non-skid surface, was a moderately firm wire brush. This allows you to get into the areas on non-skid easier, but does the job.
Thanks for the products, and look forward to keeping in touch with you regarding the new wax for my Edgewater.
Regards, Bob

From David Marlow...
I am quite happy with the wax remover. I hope you sell a zillion barrels and eliminate the Acetone-MEK-Toluene trail. Today I applied it to a fresh hull with a scrubbee pad and tested adhesion of resin on three spots. One with simple washing, adhesion poor. One with wiping on only by soft rag, adhesion very good. One with product applied and very lightly scuffed with scrubbee pad, adhesion outstanding!
I will include an article in our next Newsletter (April) relative to your products and the goal to mitigate damage to the environment. Perhaps you might like to write the article for submission?

From David Krupp, Tonopah, Arizona...
My wife and I own a 1989 fish/ski boat in Tonopah, AZ. The boat suffered from extremely oxidized wax all over the hull of the boat, particularly the color areas. After trying every cleaner, wax remover, rubbing compound, and everything else I could think of to clean the boat I began to get extremely frustrated. My wife, sensing my frustration and unbeknownst to me, purchased some of you Marine/Mold Release Wax Remover. I witnessed a miracle. In about three hours we were able to remove all of the old wax from the boat. I could not believe how easily the old wax came off with a little soaking and a soft brush. I figured it would take me years to remove the old wax with a buffer and rubbing compound. It even removed the sticky from the old ID numbers. I don't remember the last time I was more impressed with a product. I will definetly recommend your product to anyone and everyone who has a boat.