BOAT POLISH - Instructions for Use...

The polish can be applied with a wet or dry applicator.
Apply with a wet applicator (especially for the first coatings of the season)
Additional coats can be applied with a dry applicator- Wipe on/Wipe off

1) Get a good applicator(preferably a sponge wrapped in terry cloth)
2) Submerge the applicator in a buvket of water- Remove and squeeze excess water from the applicator
3) Squirt a siver dollar size shot of polish onto the applicator
4) Apply in straight strokes
5) Prior to reloading the applicator with a fresh squirt of polish, submerge and swish it to release collected dirt.
6) Repeat the process and put a coat of polish on the entire boat
8) Allow the polish to dry and "cure' into the finish for at least 30 minutes
9) When the polish has drued, wipe it off with a clean towel